Table of Contents
Advertisement
Basic operation
On the control panel
Power-on
1.
Turn on the device connected to the projector first.
2.
Plug the AC adapter in both the projector and the wall outlet.
The POWER indicator lights up.
The CHARGE indicator lights up when the projector connects with a not fully
charged battery.
The projector charges a not fully charged battery all the time.
The projector stops charging battery when battery is fulled.
3.
Press the POWER button either on the control panel or the remote control.
The LAMP indicator lights up and the POWER indicator goes off.
The message "Searching for source" appears on the screen.
The lamp occasionally fails to light up. Turn off the projector, wait for one minute and
then turn on it again.
After the POWER button is pressed, the image may flicker before the lamp becomes
stable. This is not a product malfunction.
ViewSonic
PJ106D
Indicator
Condition
Stand-by.
When the lamp is on.
3
LAMP(Green)
POWER(Red)
Off
On
3
4
On
Off
19
Advertisement
Table of Contents
