Basic Operation - ViewSonic 300 User Manual

Basic Operation

The basic operations shown in Table 3 can be performed with the supplied remote control device or
by way of the projector's control panel. Items indicated by (*) may be used from the control panel.
Item
Select Input Signal (*): Press the INPUT button.
RGB IN 1
VIDEO
Select RGB Input: Press the RGB button.
VIDEO/S-VIDEO/COMPONENT VIDEO
INPUT
RGB IN 1
SELECT
Select Video Input: Press the VIDEO button.
RGB IN 1/RGB IN 2
VIDEO
• The selected signal name is displayed for approximately 3 seconds when the
input signal is changed.
Set/Clear Position Adjustment Mode: Press the POSITION button.
The [
Image Position Adjustment: Press the
POSITION mode.
POSITION
• Valid only in the MAGNIFY mode if a video signal is detected.
• After approximately 10 seconds of inactivity the [
POSITION mode will be cleared automatically.
•
Initialize Each Item: Select an item and press the RESET button.
Initialize Position Adjustment: Press the RESET button and the
RESET (*) POSITION mode. This function is valid only if a RGB signal is input.
• Valid except for the VOLUME, LANGUAGE, WHISPER and H PHASE.
• The RESET button may operate as the mouse control button. Refer to page 4.
Set MAGNIFY Mode: Press the MAGNIFY
Move Magnified Area: Run the POSITION in the MAGNIFY mode.
Adjust Magnification: Press the MAGNIFY
MAGNIFY
Clear MAGNIFY Mode: Press the MAGNIFY
• The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT
SELECT or VIDEO, or by changing the input signal.
Set/Clear FREEZE Mode: Press the FREEZE button. The [
and the image will be frozen in the FREEZE mode.
• The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE,
FREEZE
Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the
input signal.
• Do not forget to clear frozen static images.
• Use the remote control device at a distance of approximately 5 m from the sensor on the
NOTE:
front of the projector, and within a range of 30 °left-right. Strong light and obstacles will interfere
with the operation of the remote control device.
10 ViewSonic PJ750
Table 3: Basic Operation
RGB IN 2
S-VIDEO COMPONENT VIDEO (
RGB IN 2 ( RGB IN 1)
VIDEO/S-VIDEO/COMPONENT VIDEO
S-VIDEO COMPONENT VIDEO (
] icon is displayed in the POSITION mode.
and buttons may operate as the mouse control button. See page 4.
Description
RGB IN 1)
RGB IN 1/RGB IN 2
VIDEO)
and
] icon is extinguished and the
button.
button in MAGNIFY mode.
button.
buttons in the
] icon is displayed,