Operating Range; Remote Control Precautions - ViewSonic PJ106D User Manual

Svga led projector
Hide thumbs Also See for PJ106D:
Table of Contents

Advertisement

2. Remove the old Lithium coin cell and install new one.
Ensure that the side with the mark "+" is up.
3. Push the battery holder back into the remote control until you feel a
click.

Operating Range

The infrared signal operates by line-of-sight up to a distance of approximately 9.8 (3 m) and
within a 30-degree angle of the remote sensor. The projector will not function if there are
objects between the remote control and the remote sensor on the projector or if strong light
falls on the remote sensor. A weak battery will also prevent the projector from operating.
This sample may be slightly different from actual range.

Remote Control Precautions

Handle the remote control carefully.
Do not use the remote control if it got wet. Remove the battery immediately. Make sure
the remote control and battery are dry before use.
Avoid excessive heat and humidity.
Do not place the battery upside down.
Keep the coin cell battery out of reach of children so as not to allow them to swallow
the cell battery.
ViewSonic
PJ106D
Approx. 30
o
11

Advertisement

Table of Contents
loading

Table of Contents