Basic Operation - ViewSonic PJ500 User Manual

Basic Operation

Table 3 below refers to buttons on the projector control panel and on the remote control. Items
marked with (*) may be accessed from the projector control panel.
Item
INPUT SELECT
POSITION
RESET (*)
MAGNIFY
FREEZE
KEYSTONE (*)
VOLUME
MUTE
Table 3: Basic Operation
Description
Select Input Signal (*) : press the INPUT Button.
RGB > VIDEO > S-VIDEO > COMPONENT (>RGB)
Select RGB Input: Press the RGB button.
VIDEO/S-VIDEO/COMPONENT > RGB
Select Video Input: Press the VIDEO button.
RGB > VIDEO/S-VIDEO/COMPONENT
VIDEO > S-VIDEO > COMPONENT (>VIDEO)
• The selected signal name is displayed for approximately 3 seconds when the input signal is
changed.
Set/Clear Position Adjustment mode : Press the POSITION button.
The icon is displayed in the POSITION mode.
Image Position Adjustment: Press the
• Valid only in the MAGNIFY mode when a video signal is input.
• After approximately 10 seconds of inactivity the
mode is cleared automatically.
Initialize Each item: Select an item and press the RESET button.
Initialize Position Adjustment: Press the RESET button and the POSITION mode.
This function is valid only when RGB signal is input.
• Valid except for: VOLUME, LANGUAGE, H PHASE, and WHISPER.
Set MAGNIFY Mode: Press the MAGNIFY
Move Magnified Area: Run the POSITION in the MAGNIFY mode.
Adjust Magnification: Press the MAGNIFY
MAGNIFY (+) magnifies the image. MAGNIFY (-) reduces the image.
Clear MAGNIFY Mode: Press the MAGNIFY
• The MAGNIFY mode is cleared by selecting AUTO, ASPECT, INPUT SELECT, or VIDEO,
or changing the input signal.
Set/Clear FREEZE Mode: Press the FREEZE button. When the [
image is frozen in the FREEZE mode.
• The FREEZE mode is cleared by selecting POSITION, VOLUME, MUTE, Automatic
Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the input signal.
• Do not forget to clear frozen static images.
Set/Clear KEYSTONE Mode: Press the KEYSTONE
Adjust Keystone: Press the
reduces the width of the bottom of the projected image.
of the projected image.
Volume Adjustment: Press the VOLUME
(up arrow) increases the loudness of the sound, and (down arrow) decreases the loudness of
the sound.
Set/Clear Mute Mode: Press the MUTE
buttons in the POSITION mode.
icon disappears and the POSITION
button.
/ button in MAGNIFY mode.
button.
button.
buttons in the KEYSTONE mode.
buttons on the remote control.
button. The sound is silenced in this mode.
ViewSonic PJ500
] icon is displayed, the
reduces the width of the top
10