Optical
connector(s)
GPIB connector
RS-232 connector
Rear-Panel Features
Figure 3-2. The Agilent 86060C-series rear-panel functional area
The number of optical connectors depends on the Agilent 86060C-series
switch. The connectors are grouped as Port A and Port B.
Provides for remote control of the lightwave switch via the GPIB interface bus.
Refer to "Programming over GPIB" on page
Provides for remote control of the lightwave switch via RS-232.
gramming over RS-232" on page
4-6.
4-8.
Using the Switch
Rear-Panel Features
Refer to "Pro-
3-5