Table of Contents
Advertisement
Using the Switch
Changing Switch Position
Changing Switch Position
To set single port A switches
The 1 × N switch has a single Port A channel and multiple Port B channels.
1 To select a Port B channel, press: SWITCH PORT
The Port B channels are shown in inverse video and the prompt, Port B
active, appears at the bottom of the display.
2 Use the arrow keys to change the Port B channel.
You can also use the numeric keys to enter the desired Port B channel. For
example: 4 followed by ENTER.
The new connection is displayed on the front-panel display.
To set dual port A switches
The 2 × N switch has two Port A channels and multiple Port B channels.
1 To select the Port A channel, press: SWITCH PORT
The Port A channels are shown in inverse video and the prompt, Port A
active, appears at the bottom of the display.
2 To select a Port B channel, again press: SWITCH PORT
The Port B channels are shown in inverse video and the prompt, Port B
active, appears at the bottom of the display.
3 Use the arrow keys to change the channel.
You can also use the numeric keys to enter the desired channel. For example:
4 followed by ENTER.
The new connection is displayed on the front-panel display.
3-6
Advertisement
Table of Contents
