Standard Scpi Commands - Agilent Technologies 86062C Series User Manual

Usage:
Query Syntax:
Returned Format: <value>
Where:
Example:
Usage:
Programming

Standard SCPI Commands

Standard SCPI Commands
:STATus:<node>:CONDition
The :STATus:<node>:CONDition query returns the value for the condition
register for the node. Condition registers have no function in this instrument,
but the query is included for compatability with the SCPI standard. This query
always returns the value 0.
GPIB only
:STATus:<node>:CONDition?
<value> = 0 (integer – NR1)
<node> = OPERation | QUEStionable
OUTPUT 711;":STATUS:OPERATION:CONDITION?"
ENTER 711;Value
PRINT Value
:STATus:<node>:ENABle
The :STATus:<node>:ENABle command sets the enable register for the node.
Enable registers have no function in this instrument, but the command is
included for compatability with the SCPI standard.
The :STATus:<node>:ENABle query returns the value of the enable register
for the node.
GPIB only
4-22