Table of Contents
Advertisement
you for the switch layer on which to install the spare fibers:
Press 1 for layer 1
Press 2 for layer 2
10 The display will prompt you to enter 1 for spare fiber 1, or 2 for spare fiber 2.
You recorded this identification number in
11 The display will prompt you to enter the number of the front or rear panel
channel to be replaced. Enter the number of the channel and press Enter.
The display will show the intended cable changes.
12 Press Enter to confirm the changes.
.
Figure 5-1. Top view of the Agilent 86060C or 86061C lightwave switch
Spare Channel Replacement Procedure
Step
4.
Servicing
5-5
Advertisement
Table of Contents
