Troubleshooting - Electrolux TW SL5 E User Manual

Hide thumbs Also See for TW SL5 E:
Table of Contents

Advertisement

Available languages

Available languages

5. Open the cap from the pipe and drain
the water.
6. Close the cap.
7. Close the heat exchanger cover.
8. Lock the blockage until it snaps.
9. Close the heat exchanger door.

13. TROUBLESHOOTING

Problem
The tumble dry-
er does not op-
erate.
Possible cause
1)
The tumble dryer is not connec-
ted to mains supply.
The loading door is opened.
The On/Off (Ein/Aus) button was
not pushed.
The Start/Pause button was not
pushed.
The appliance is in the standby
mode.
12.6 Cleaning the drum
WARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum ribs. Dry the cleaned surfaces with a
soft cloth.
CAUTION!
Do not use abrasive materials
or steel wool to clean the
drum.
12.7 Cleaning the control panel
and housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
CAUTION!
Do not use furniture cleaning
agents or cleaning agents
which can cause corrosion to
clean the appliance.
12.8 Cleaning the airflow slots
Use a vacuum cleaner to remove the fluff
from the airflow slots.
Connect in at mains socket.
Check fuse in fuse box (domestic
installation).
Close the loading door.
Push the On/Off (Ein/Aus) button.
Push the Start/Pause button.
Push the On/Off (Ein/Aus) button.
ENGLISH
Remedy
23

Advertisement

Chapters

Table of Contents
loading

Table of Contents