Troubleshooting - Electrolux EDH804H5WB User Manual

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 Error Codes
The appliance does not start or it stops during operation.
First try to find a solution to the problem (refer to the table). If the problem persists,
contact the Authorized Service Center.
WARNING!
Deactivate the appliance before carrying out any check.
In case of major problems, the acoustic signals operate, the display shows an
error code and the Start/Pause button may flash continuously:
Error code
E91
EH0
If the display shows other error codes, deactivate and activate the appliance. If
the problem continues, contact the Authorized Service Center.
In case of different problem with the tumble dryer check the table below for
possible solutions.
Possible cause
Internal fail. No communication
between electronic elements of
the appliance.
The mains supply is unstable.
Remedy
The program was not finished
properly or the appliance
stopped too early. Switch the
appliance off and on again.
If the error code appears again,
contact the Authorized Service
Center.
When the appliance is showing
EH0, please wait until main
supply is stable than press
start. If the appliance pause
the cycle without any indication
then press the cycle start. If the
warning will occur check the
power cord /socket integrity or
main supply.
21
ENGLISH