Disable WebUI
On the Disable WebUI page, you can disable the camera's web interface, including any non-ONVIF API calls.
This will disable any access to the camera other than through the ACC Client or an ONVIF-compliant VMS.
Important: If you disable the web UI and non-ONVIF APIs, you will only be able to connect to the
camera with the ACC Client or an ONVIF-compliant VMS.
The only way to reverse this setting is by doing a physical firmware revert on the camera. See the
camera's installation guide for more information.
To disable the web UI and non-ONVIF APIs:
1. Select the Disable non-ONVIF APIs checkbox.
2. Click Apply.
3. Read the warning message that appears, and click OK if you want to proceed with this setting.
Disable WebUI
40