Avigilon H4VI-RO1-IR Interface User Manual page 12

Video intercom camera
Table of Contents

Advertisement

 c. In the Static IPv6 Addresses field, enter the preferred IPv6 address. Click + for additional
addresses.
To change the prefix length, enter the preferred IPv6 address using Classless Inter-Domain
Routing (CIDR) notation. For example, 2001:db8::1/32 would indicate the address prefix is
32-bits long.
By default, the prefix length is set to /64.
Note: The configured prefix length may not display correctly in the web interface, but
the prefix used by the camera will be the configured length.
 d. In the Default Gateway field, enter the Default Gateway you prefer to use. You can only assign
a Default Gateway if RA is disabled.
The IPv6 addresses that can be used to access the camera are listed under the Current IPv6
Addresses area.
 4. If you need to customize the hostname, enter it in the Hostname field.
 5. In the DNS Lookup area, select how the camera will obtain a Domain Name System (DNS) server
address.
 
Obtain DNS server address automatically: select this option to automatically find a DNS
l
server.
 
Use the following DNS server addresses: select this option to manually set DNS server
l
addresses. You can set up to three addresses:
 
o
Preferred DNS server: assign the address of the preferred DNS server in this field.
 
o
Alternate DNS server 1: (optional) assign the address of an alternate DNS server to this
field. In the case that the preferred server is not available, the camera will attempt to
connect to this server.
 
o
Alternate DNS server 2: (optional) assign the address of another alternate DNS server
to this field. In the case that both the preferred server and the first alternate server are
unavailable, the camera will attempt to connect to this server.
 6. In the Control Ports area, you can specify which control ports are used to access the camera. You can
enter any port number between 1 and 65534. The default port numbers are:
 
HTTP Port: 80
l
If you want to limit camera access to secure connections only, clear the Enable HTTP
connections check box. HTTP Port access is enabled by default.
 
HTTPS Port: 443
l
 
RTSP Port: 554
l
 
RTSP Replay Port: 555
l
Network
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

H4

Table of Contents