Table of Contents
Advertisement
ONVIF Profile G
ONVIF Profile G allows video management systems to retrieve video from a camera's onboard storage when
there is a gap in the VMS video due to a network outage or similar event.
Cameras with firmware versions 4.4.0.X or later will have ONVIF Profile G already enabled.
l
Cameras with firmware older than 4.4.0.X will have the option to Enable ONVIF Profile G when they
l
upgrade their firmware.
Note: Enabling ONVIF Profile G will require reformatting the SD card. You will lose all footage
currently recorded on the SD card. Ensure that you download any required video clips before
enabling Profile G.
Onvif is a trademark of Onvif, Inc.
Downloading Recorded Video from the Web Interface
Listed in the Recordings section are all the videos that have been recorded to the SD card.
If you are using two SD cards you will have to select the SD card that you want to download video from. You
may have to check both SD cards for the recording you want to download. The camera can record video to
either SD card based on the remaining capacity of the SD cards.
If you are using a CryptR micro card in the camera's SD slot for FIPS level 3 encryption, you will not be able to
use onboard storage in the SD card slot. For camera's with 2 microSD slots you can only use the slots for
either storage or the CryptR micro card, both options cannot be used at the same time.
It is recommended that you download recorded video from the web interface. However, if your bandwidth is
limited, you can choose to download the recorded video directly from the SD card. For more information, see
Downloading Recorded Video from the SD Card on the next
To download recorded video from the web interface, perform the following:
Tip: If you are using two SD cards, select the SD card that you want to download the recording from.
1. On the Storage page, select the check box beside all the videos you want to download.
To help you find the video you want, you can filter the videos by date and time. Select the Filter check
box then select the time range.
2. Click Download.
The selected video files are automatically downloaded to your browser's default Downloads folder. If you are
prompted by the browser, allow the download to occur.
ONVIF Profile G
page.
27
Advertisement
Table of Contents
