Table of Contents
Advertisement
Intercom
Use the settings on the Intercom page to setup the SIP connection for the Video Intercom. You can configure
your Video Intercom to work with SIP or your VMS. If you are using SIP, you can configure for:
SIP Peer to Peer calling. Used for configuring the Video Intercom to make a direct SIP call to a
l
specific SIP phone. For more information, see
SIP/PBX Server calling. Used to register the Video Intercom on the PBX server as one of the
l
extensions, and then use the PBX server as a proxy for making calls to a SIP phone. For more
information, see
SIP Server Configuration on the next
If you want to use your Video Intercom with your ACC system, select VMS as the Intercom Call Destination
and configure your Video Intercom settings on the Audio page and in the ACC Client. For more information,
see
Audio on
page 35, and the ACC Client User Guide. The codec, volume and microphone settings on the
Audio page will also affect SIP configurations.
Important: If any SIP configuration setting is changed while a call is ongoing, that call will be
dropped when the changes are applied.
SIP Peer to Peer Configuration
SIP peer to peer calling configuration is a simple setup for locations that want to have the same SIP phone
always answer calls from the Video Intercom, such as a security desk phone.
1. Select SIP as the Intercom Call Destination.
2. Configure the following SIP Peer To Peer Call Settings:
Display Name: Enter the name for the Video Intercom that will be displayed when calling the
l
SIP phone. This field is optional and can be left empty.
SIP Call Destination: Enter the domain address of the SIP phone that the Video Intercom will
l
dial. This must be a valid IPv4, IPv6, or DNS name.
SIP Call Destination Port: Enter the UDP port number of the SIP phone that the Video Intercom
l
will dial. This must be a valid port number between 1 and 65534. The default port is 5060.
Note: Ports 1-1024 are reserved IP ports. SIP ports should be outside of this reserved
range and also should not use any ports used by the ACC system.
Allow Incoming SIP Calls: Enable this option to turn on SIP call auto-answering for the Video
l
Intercom. With this option enabled, any SIP phone can make a call to the Video Intercom IP
address or domain address to talk through the Video Intercom even if the visitor has not
pressed the call button.
3. Click Apply to save your changes.
Intercom
SIP Peer to Peer Configuration
page.
below.
31
Advertisement
Table of Contents
