Summary of Contents for LEGRAND CHIEF Fusion FCA801
Page 1
I N S T A L L A T I O N I N S T R U C T I O N S Above Cart/Ceiling Above Wall (FCA801 shown) Below Cart/Ceiling Below Wall Fusion™ Large Above/Below Accessory Shelf Spanish Product Description German Product Description Portuguese Product Description Italian Product Description...
The information contained in this document is subject to change without notice or obligation of any kind. Legrand standard weight limit of mounting system - makes no representation of warranty, expressed or implied, (weight of FCA800/801 shelf + shelf components) regarding the information contained herein.
FCA800/801 Installation Instructions ASSEMBLY AND INSTALLATION (Below Cart/Ceiling) Below Installation (FCA801 shown) NOTE: FCA800 and FCA801 shelves may be installed above or below displays. To install above display, proceed to (L) x 2 “Above Installation” Section. Assembling Shelf to Upright Bracket Attach shelf (E) to shelf support (D) using two #10-24 x 3/4”...
Page 9
Installation Instructions FCA800/801 Slide second shelf bracket (C) underneath lower rail on wall mount, lining up holes on shelf bracket (C) to main bracket (Below wall - maximum) (B). (See Figure 5) (FCA800 shown) Use two 1/4-20 x 1/4” button head cap screws (M) and two large washers (H) to secure shelf bracket (C) to main bracket (B).
Page 10
FCA800/801 Installation Instructions Attaching Shelf to Cart/Ceiling Mount Installing to FCA623 Accessory IMPORTANT ! : If installing to a 2x1 display cart using IMPORTANT ! : Steps 6-10 only apply if installing to the FCA623 accessory, proceed to “Installing to FCA623 FCA623 accessory.
Page 11
Installation Instructions FCA800/801 NOTE: 13. (For minimum extension) Slide upright bracket behind Refer to Table 2 and dimension drawings on pages 3- main bracket. (See Figure 13) 6 to determine the extension level based on extension distance from mount center. 14.
Page 12
FCA800/801 Installation Instructions Above Installation Attaching Shelf to Wall Mount Use two 1/4-20 x 1/4” button head cap screws (M) and two Assembling Shelf to Upright Bracket large washers (H) to secure shelf bracket (C) to main bracket (B). (See Figure 16) Install two 1/4-20 x 1/2”...
Page 13
Installation Instructions FCA800/801 NOTE: Attaching Shelf to Cart/Ceiling Mount Refer to Table 3 and dimension drawings on pages 3- 6 to determine the extension level based on extension IMPORTANT ! : If installing to a 2x1 display cart using distance from mount center. the FCA623 accessory, proceed to “Installing to FCA623 Table 3: Above Wall Mount Accessory”...
Page 14
FCA800/801 Installation Instructions Installing to FCA623 Accessory NOTE: Refer to Table 4 and dimension drawings on pages 3- 6 to determine the extension level based on extension NOTE: Steps 6-10 only apply if installing to FCA623 distance from mount center. accessory.
Installation Instructions FCA800/801 Height Adjustment (Single Screw option) Install 1/4-20 x 3/8” Phillips pan machine screw (Q) through mounting slot on shelf and into hole on bottom of camera. (See Figure 27) Loosen hardware used to attach main bracket (B) to upright bracket (A).
P +31 (0) 495 580 852 F +31 (0) 495 580 845 Asia Pacific A Office No. 918 on 9/F, Shatin Galleria 8800-002652 Rev02 18-24 Shan Mei Street 2019 Legrand Fotan, Shatin, Hong Kong www.legrandav.com P 852 2145 4099 07/19 F 852 2145 4477...
Need help?
Do you have a question about the CHIEF Fusion FCA801 and is the answer not in the manual?
Questions and answers