Page 1
I N S T A L L A T I O N I N S T R U C T I O N S In-Wall Camera Shelf Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description FPIWMA100...
The information contained in this document is subject WARNING: Use this accessory only for its intended use as to change without notice or obligation of any kind. Legrand described in these instructions. Do not use attachments not makes no representation of warranty, expressed or implied, recommended by the manufacturer.
Page 3
Installation Instructions FPIWMA100 DIMENSIONS CABLE MANAGEMENT PASS THROUGH 1.00 X .50 9.77 248.2 HEIGHT ADJUSTMENT CABLE MANAGEMENT CABLE MANAGEMENT PASS THROUGH 1.00 X .90 TIE OFFS CABLE MANAGEMENT CABLE MANAGEMENT TIE OFFS TIE OFFS CABLE M ANAGEMENT PASS THROUGH 1.00 X .50 CABLE MANAGEMENT PASS THRO UGH 1.00 X .93 DIMENSIONS:...
Page 4
FPIWMA100 Installation Instructions DIMENSIONS 2.67 CONFERENCESHOT 67.9 EPTZ CAMERA SHOWN AS REFERENCE ONLY CONFERENCESHOT EPTZ CAM ERA MOUNTING LOCATION INTELLISHOT-M AUTO-TRACKING CAM ERA SHOWN INTELLISHOT-M AUTO-TRACKING AS REFERENCE ONLY CAM ERA MOUNTING LOCATION FPIWMS SHOWN AS REFERENCE ONLY DIMENSIONS: INCHES [MILLIMETERS]...
Installation Instructions FPIWMA100 TOOLS REQUIRED FOR INSTALLATION 3/16" (included) PARTS A (1) B (1) [Camera shelf] [Horizontal Adjustment bracket] C (1) [Adapter bracket] F (1) [Hardware Bag] FA (6) FB (2) #10-24 x 3/8" FC (2) 1/4-20 x 1/2" [Adhesive-backed foam] FF (1) FE (1)
FPIWMA100 Installation Instructions Assembly And Installation convert (D) to below Installation to FPIWMKIT mount configuration Hang macro height-adjustment brackets (D) onto FPIWMKIT upper rail lip on bracket. (See Figure 1) (above install) (D x 2) Figure 2 Use two #10-24 x 3/8" button head cap screws (FA) to secure horizontal adjustment bracket (B) to two macro height-adjustment brackets (D).
Page 9
Installation Instructions FPIWMA100 Use two 1/4-20 x 1/2" Phillips flathead cap screws (FB) to secure camera shelf (A) to micro height-adjustment bracket (E). (See Figure 5) (FA) x 2 NOTE: If adapter bracket (C) is required to mount camera, attach adapter bracket at this point rather than camera shelf.
FPIWMA100 Installation Instructions Camera Installation NOTE: If desired mounting height is a location where screws are aligned with keyhole locations, use universal washers (FD) to secure shelf in position. (See Figure 9) WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components attached to accessory does not exceed 10...
Installation Instructions FPIWMA100 Adjustments Cable Management Micro Height-adjustment Use cable ties (not included) to secure cables as desired to mount utilizing tabs on brackets. (See Figure 14) Loosen screws on micro height-adjustment bracket. (See Figure 13) tab locations Adjust to desired height. (See Figure 13) Tighten screws on micro height-adjustment bracket.
Page 12
P +31 (0) 495 580 852 F +31 (0) 495 580 845 Asia Pacific A Office No. 918 on 9/F, Shatin Galleria 8800-003414 Rev00 18-24 Shan Mei Street 2024 Legrand Fotan, Shatin, Hong Kong www.legrandav.com P 852 2145 4099 06/2024 F 852 2145 4477...
Need help?
Do you have a question about the CHIEF FPIWMA100 and is the answer not in the manual?
Questions and answers