Table of Contents
Advertisement
Adjusting the inclination
The inclination of the monitor can be adjusted by -3° (forwards) and +35°
(backwards) from its vertical position.
► Hold the monitor with both hands on the left and right sides of the case and move
it to the desired angle (2, see
Adjusting the rotation
The monitor can be rotated by ±172°.
► Grasp the monitor with both hands on the right and left edge of the casing
and turn it to the desired position.
Adjusting portrait format
The monitor can be rotated from horizontal format (landscape mode) into
vertical format (portrait mode).
► Grasp the monitor with both hands on the right and left edges of the casing, move it into
the highest position and turn it clockwise until it is in the portrait position.
► To set the screen back into landscape mode, rotate it back in the opposite direction.
The screen supports the "Autorotation" function with the associated software
(DisplayView), which is used to adapt the display to the orientation of the screen
(see
"Notes on the program "DisplayView"", Page
For you to be able to display the screen contents in portrait mode, your graphics card
will also need to support this function or you will need to use special software.
In the OSD menu you have the option of switching the OSD manually from landscape
mode to portrait mode (see
Fujitsu
"Adjusting height", Page
"Functions of the control panel and the OSD menu", Page
14).
43).
Getting started
22).
15
Advertisement
Table of Contents
