Operation; Switching The Device On And Off - Fujitsu P27-9TQ Operating Manual

Operation

Switching the device on and off

1 = ON/OFF switch
The colour of the status LED alters in the following way:
Status LED
blue
green
orange
Glows white
Flashes white
does not light up
► Switch the device on again with the ON/OFF switch (1).
You will find more information about the behaviour of the On/Off switch in All-in-One
mode in chapter:
Fujitsu
1 2
Status
Monitor and computer are switched on (normal mode).
Monitor and computer are switched on (ECO mode).
Monitor is not receiving a video signal or is in power saving mode.
The monitor is in All-In-One mode and the connection to the computer
is interrupted.
The monitor is in All-In-One mode and the connection to the computer
is switched on.
The monitor is in All-In-One mode and the computer is in power-saving
mode.
Monitor is switched off.
The monitor is in All-In-One mode and the computer is powered down.
"Notes on All-in-One operation", Page 48
2 = Status LED

Operation

1 2
19