Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function. Here the monitor does not distinguish between the individual energy-saving
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of
immediately switching into the mode with the highest energy-saving effect.
Mode
Power On –
maximum operation
Power On –
normal mode
Energy Star
EU Energy Label
ECO
Readiness
(standby)
Off
If the computer detects inactivity (no input) it sends an appropriate signal to the monitor to
reduce the power consumption (power saving mode). The status LED of the monitor changes
colour to show the change in status. ECO operation is the pre-set factory default.
Once an input is made at the computer the screen contents are restored.
For detailed information on how energy-saving mode operates, please refer to
the operating manual or technical manual of the computer.
Fujitsu
State
Maximum brightness /
with USB and audio
Maximum brightness /
without USB and audio
Factory settings,
without USB and audio
Without USB and audio
Without USB and audio
Without USB devices
connected
Without USB devices
connected
Notes on power management
Power consumption
Typical
Maximum
132.2 W
142 W
27.2 W
30 W
20.11 W
22 W
23.3 W
26 W
0.39 W
0.5 W
0.27 W
0.5 W
Status LED
–
–
–
45