Transport And Storage - Boyser AMP Series Operating Instructions Manual

Operating instruccions Peristaltic Pumps
7.

TRANSPORT AND STORAGE

7.1. Transport
- The pump is protected by cardboard packaging or a wooden crate.
- The packaging materials are recyclable.
7.2. Storage for less than 1 month
- The pump should be in a resting position, rotor in horizontal position.
- Avoid areas open to harsh weather or excessive humidity and temperatures lower
than 0°C or higher than 30°C.
- Spare hoses should be stored in a dry place away from direct light.
7.3. Storage for more than 1 month
- Avoid areas open to harsh weather or excessive humidity and temperatures lower
than 0°C or higher than 30°C.
- IMPORTANT Disassemble one of the shoes (see also section 9.4.1 for instructions):
- Remove the front cover.
- Remove a shoe (the shoe that is not touching the pump hose)
- Mount the front cover.
- Turn the rotor with the help of the motor so that the remaining shoe
- For storage periods of longer than 30 days, protect the coupling surfaces (clamps,
reducers, motors) with adequate anti-rust protection.
- For storage periods longer than 6 months rotate the rotor a few turns to prevent
damage to bearings and oil seals and to prevent grease migration.
- Spare hoses should be stored in a dry place away from direct light.
7.4. Elevation
- AMP pumps sizes can be lifted manually. AMP-22 pumps must be lifted by two
people.
It is the customer's responsibility to adhere to local workplace legislation.
Weights AMP-10/-13
Total pump 14 kg
weight
30 lbs
Lifting 1 person
AMP Series
is not pressing against the pump hose.
AMP-16
23 kg
50 lbs
1 person
AMP-19
23 kg
50 lbs
1 person
10
AMP-22
49 kg
108 lbs
2 people