Table of Contents
Advertisement
Additional information
Abbreviations
BPDEV ..................Plate Heat Exchanger Bypass
TČ ............................Heat Pump
TK ............................Thermocontact
PMO .......................Antifreeze Protection
ROV ........................Rotary Heat Exchanger
VZT .........................Air-handling Device
ZZT .........................Heat Recovery
LON ........................Local Operating Network
SCADA ..................Supervisory control and data acquisition
BMS .......................Building Management System
ModBus RTU .....Communication protocol
(Remote Terminal Unit)
Climatix ................A series of controllers providing
the same features
AHU .......................Air Handling Unit
SELV ......................Safety Extra-Low Voltage
HMI .........................HumanMachineInterface
– remote controller
BACnet .................Building Automation and Control Network
TCP/IP ..................Transmission Control Protocol,
e.g. Ethernet/Internet
It is alway necessary observe local laws!
Warning
The manufacturer reserves the right to make changes and
amend the documentation due to technical innovations and
changes to legislation without prior notice.
Control units VCS
Printing and language mistakes are reserved.
These Installation and Operating Instructions (as a
whole or a part) must not be printed or copied without
prior written permission from REMAK a. s., Zuberská
2601, Rožnov pod Radhoštěm, Czech Republic
These Installation and Operating Instruc-
tions are the sole property of REMAK a. s.
Changes reserved.
Issued: 19. 5. 2023
67
Advertisement
Table of Contents
