Table of Contents
Advertisement
X Boot
Setup Prompt Timeout
Set the number of seconds to wait for the setup activation key. 65535 (0xFFFF) denotes indefi-
nite waiting.
Bootup NumLock State
Select the keyboard NumLock state: On or Off.
Quiet Boot
This section is used to enable or disable quiet boot option.
Boot Option Priorities
Rearrange the system boot order of available boot devices.
Fast Boot
Enables or disables boot with initialization of a minimal set of devices required to launch active
boot option. Has no effect for BBS boot options.
Note:
If "Boot option filter" of "CSM Configuration" is set to "UEFI and Legacy" or "UEFI
only", and "Quiet Boot" is set to enabled, "BGRT Logo" will show up for configura-
tion. Refer to the Advanced > CSM Configuration submenu for more information.
User's Manual | ADS101_ADS103
X Save & Exit
Save Changes and Reset
To save the changes, select this field and then press <Enter>. A dialog box will appear. Select
Yes to reset the system after saving all changes made.
Discard Changes and Reset
To discard the changes, select this field and then press <Enter>. A dialog box will appear. Se-
lect Yes to reset the system setup without saving any changes.
Restore Defaults
To restore and load the optimized default values, select this field and then press <Enter>. A
dia-log box will appear. Select Yes to restore the default values of all the setup options.
Boot Override
Move the cursor to an available boot device and press Enter, and then the system will immedi-
ately boot from the selected boot device. The Boot Override function will only be effective
for the current boot. The "Boot Option Priorities" configured in the Boot menu will not be
changed.
• Save Setting to file
Select this option to save BIOS configuration settings to a USB flash
device.
• Restore Setting from file
This field will appear only when a USB flash device is detected.
Select this field to restore set-ting from the USB flash device.
Chapter 3
BIOS SETTINGS
42
Advertisement
Table of Contents
