Sime LINKER PLUS Installation And Use Manual page 33

EN
4 USE
4.1 Initial start-up
After completing the installation of the remote control
proceed as follows:
SIME LINKER PLUS,
– Set the plant's main switch to ON.
– On the boiler's control panel, set "WINTER" mode.
ON
When the SIME LINKER PLUS device starts up for the first time,
the following screen will appear to set the desired language:
–
Language
Italian
English
Greek
Spanish
– as
– use the > or < key to select a language among those availa-
ble (e.g. English) then press the ! key to confirm
– use the > or < key to select "Confirm" and save the language
– use the > or < key to select "Cancel" and return to the previ-
ous screen to select another language
!
– press to confirm
Language
Italian
Warning
English
You are setting English as
Greek
language
Spanish
Back
After confirming the language, the "Guided configuration"
screen will appear which allows for pairing the remote control
with the "SIME CONNECT" app:
Guided config
Use guided config?
No
Confirm
Yes
33