Sime LINKER PLUS Installation And Use Manual page 29

EN
After taking the SIME LINKER PLUS remote control unit out of
its packaging:
– Use a screwdriver to push the fastening tab
the base (2) from the user interface (3), making sure that the
screwdriver does not penetrate it
3
1
– Separate the 2 parts
(1) to release
2
– Attach the base plate (2) to the wall using the screws
wall plugs (5) provided with the remote control unit.
5
m WARNING
The electrical connections must conform to
the wiring diagram provided by the manu-
facturer of the boiler and must be made by
the installer.
(4) and
2
4
29