Table Of Contents; Package Contents - UPRtek PG200N User Manual

Contents
1.1 Package Contents
1
1.2 Product Introduction
1.3 Annual Product Calibration
1.4 Product Notes and Precautions
2.1 Preparing Before Use
2
2.2 Basic Measurement
3.1 Connecting with mobile device
3
3.2 Connecting to uSPECTRUM
To get more information related to operation,
firmware upgrade and warranty terms; online
application for correction and repair service,
please visit www.uprtek.com to download the
complete version.
- 1 -
........................................ 2
...................................... 3
........................... 4
................... 4
................................... 5
.................................... 11
................... 13
...................... 14

1.1 Package Contents

Please ensure the following are included in the package of this
product: In case of any flaw and/or loss please call the dealer or
this Company for help.
1.5 Product Notes and Precautions
1.
PG100N Spectrometer is a high-precision instrument. Please unpack with care.
Any vibration or collision may cause instrument damage. If the product doesn't
work normally or needs repair, please don't attempt any repairs. All repairs must
Case PG200N
be performed by the authorized customer service agent.
Spectral PAR Meter
Most LCD screens have a very small and inconsequential defective pixel rate
2. (usually less than 0.1%). This results in occasional pinpoints of white or other
colors but will not affect the accuracy of measurements.
Precautions / Warnings
Power Adaptor USB Cable
Please read the following precautions to avoid fire, excessive heat, chemical leakage
and explosion :
■
Do not disassemble or modify the battery.
■
Do not expose the battery to heat (fire) or water/moisture.
■
When disposing used/old batteries, wrap with insulation tape to shield the
battery from electrical contact with metallic objects, which might ignite a fire or
explosion.
■
If the unit is plugged into the power adapter and the battery seems to be
Protection Bag Sensor Head Stand Bracket
overheating, or if there is smoke or peculiar odors emanating from the unit,
unplug immediately to avoid the possibility of fire.
■
However, do not touch the cables if there is heat emanating from near the cables
as melted or deformed cables could expose wiring and result in burns or electric
shock.
■
Do not use cloth or anything to wrap or cover the equipment while charging -
this could cause the unit to overheat, melting the casing or causing fire.
■
If the unit is accidently immersed in water, or if moisture has seeped inside, or
metal objects have dropped into the casing, immediately remove the battery to
MicroSD Card Screwdriver
avoid fire or electric shock.
■
Do not operate or store the battery in high-temperature environments-it will
cause battery leakage and/or shorten the life of the battery .
■
Do not use paint thinner, benzene or other organic solvents to clean the
equipment - this may damage the exterior finish or touch screen, and may even
ignite fire.
Warranty Card
User Manual
3M Type-C USB Cable
(remote measurement)
Screen Wiper
Screws
- 2 -
04