Download Print this page

Important Safety Information - Pipishell PISF1 Instruction Manual

Full-motion tv wall mount
Hide thumbs Also See for PISF1:

Advertisement

IMPORTANT SAFETY INFORMATION

NOTE
• Please carefully read all instructions before attempting installation. If you do not
understand the instructions or if you have any questions or concerns, please call technical
support or email customer service.
• Before starting assembly, check all parts are included and undamaged. Do not use
damaged or defective parts. lf you require replacement parts, please call technical support
or email customer service.
• Not all hardware included in this package will be used.
CAUTION
• Avoid the risk of potential injury or property damage!
• Do not use this product for any purpose that is NOT explicitly specified in this manual.
Do not exceed the maximum weight capacity. We are not liable for damage or injury
caused by incorrect assembly, improper mounting, or inappropriate use.
WARNING
• This product is designed for use in wood stud, solid concrete, and brick walls. DO NOT
install on drywall alone.
• The wall must be capable of supporting four times the weight of the TV and mount
combined.
•This product contains small parts that may pose a choking hazard.
Note for Wood Stud Installation (Page 12)
• Avoid the risk of potential injury or property damage! Tighten the lag screws only until
they are pulled firmly against the wall plate (DO NOT overtighten). Do not use a drill; only
use a socket wrench.
• Do not use wall anchors for this mounting option. Wall anchors are used for solid
concrete, and brick walls installations only.
• Minimum wood stud size: 1 1/2" (W) x 3 1/2" (D) (38 x 89mm)
Note for Solid Concrete, or Brick Walls Installation (Page 13)
• Avoid the risk of personal injury or property damage! Tighten the lag screws only until
they are pulled firmly against the wall plate (DO NOT overtighten). Do not use a drill; only
use a socket wrench.
• Mount the arm assembly / wall plate directly on the concrete surface.
• Minimum solid concrete thickness: 8" (203mm)
• Never drill into the mortar between blocks or bricks.
02

Advertisement

loading
Need help?

Need help?

Do you have a question about the PISF1 and is the answer not in the manual?