Page 5
✚ Parts list Description Q’ty Description Q’ty Main Frame End Cap 30x70mm Rear Stabilizer Round End Cap 25mm Front Stabilizer Name Plate Thigh Pad Adjustable Post Allen Bolt M10x25mm Handlebar Allen Bolt M8X45mm Thigh Pad Support Frame Allen Bolt M8X20mm Foam Roller Tube Allen Bolt M8X20mm Metal Bushing...
Page 6
✚ Assembly Step 1 Attach the Front Stabilizer (3) to the Main Frame (1), using 2 Carriage Bolts (34), 2 Flat Washers (35) and 2 Lock Nuts (38). Step 2 Attach the Rear Stabilizer (2) to the Main Frame Assembly (1), using 2 Carriage Bolts (34), 2 Flat washers (35) and 2 Lock Nuts (38).
Page 7
Step 3 Insert the Thigh Pad Adjustable Post (4) to the Main Frame (1). Step 4 Note. The Thigh Pads (14) and the Pivot Bracket (43) are pre-assembled in the factory. Install the Thigh Pad Assembly to the Thigh Pad Adjustable Post (4) and the Handle Bar (5), using 2 Flat Washers (36) and 2 Lock Nuts Tighten these 2 nuts and bolts with wrenches.
Need help?
Do you have a question about the 876HP-B and is the answer not in the manual?
Questions and answers