Controls; Emergency Stop Button; Engine Controls - Wallenstein BXT36S Operator's Manual

BXT36S
Wood Chipper

5. Controls

WARNING!
Do not operate the machine until you are
thoroughly familiar with the position and function
of the various controls. Read the operator's
manual thoroughly. Your safety is involved!

5.1 Emergency Stop Button

IMPORTANT! Only use the emergency stop button in an
emergency. Frequent use of the emergency stop button can
damage the machine.
An emergency stop button (commonly called an E-stop) is
located on the front of the chipper hopper.
In the event of an emergency, press the emergency stop button
to immediately stop the machine. The button stays on (pressed)
until it is reset.
The emergency stop button has two states:
Off The emergency stop is off. The machine can operate.
On The emergency stop is on (the button is pressed). The
machine cannot operate.
To reset (turn off) the emergency stop button, turn the
button clockwise and pull.
Figure 8 – Emergency stop button

5.2 Engine Controls

Before you start the engine, read and understand
the safety and operating information under
W065
Engine Operation on page 27.
IMPORTANT! For complete information about the engine
controls, see the engine manufacturer's manual.
5.2.1 Throttle Control and Fuel Shutoff
The throttle control and fuel shutoff lever has the following
functions:
Fast
The engine speed is fast.
Slow
The engine speed is slow.
Fuel shutoff
The fuel-shutoff valve is closed.
Stop
The engine is stopped (off).
STOP
ON
Figure 9 – Engine throttle control and fuel shutoff
01733
01821
21
WARNING!
STOP
Controls