Optex REDSCAN mini-Pro Series Installation Instructions Manual page 53

INSTALLATION INSTRUCTIONS
Parts layout inside the cover and their functions
Ethernet Port (PoE)
Powering ON
Startup conditions
Enter the DC power to the power supply input terminal, or connect PoE
power supply equipment to the Ethernet Port (PoE). After power on, all
the LEDs are turned on for approx. 70 seconds and then the status and
alarm LED is turned off. During this period, REDSCAN mini-Pro itself
performs initial settings.
The Ethernet Port inside the base is for constant connection.
PoE is supported.
Default
- IP address
: 192.168.0.126
- Subnet mask : 255.255.255.0
- Default gateway : 192.168.0.1
EN-53
REDSCAN mini-Pro