Table of Contents
Advertisement
4-5
SCAN
When
the scan function
is turned
on, turn the tone alert
Memory Channel Recall
| 4-4. 8. Memory Shift
, tone hannel. —
has been successfully transferred to the VFO.
i The frequency
can
be changed
with the tuning con-
| trol or the UP/DWN key on the microphone.
.
iNote
|
lf an Odd Split Memory
channel
is selected,
only the
{receive data will be copied to the VFO.
will turn OFF to signal the data
©
function
off. If the tone alert function
is on, the scan
operation will not activate.
4-5-1
Scan Operation
1. Band scan
.
Scan
proceeds
over the entire band.This function
op-
erates in the VFO mode only.
2. Programmable Band scan
The scan
range for the 2.meter band is specified
in
Memory Channels 13 and 14.
The scan
range for the 70 cmeter band is specified
in
Memory
Channels
15 and 16. This function
veer
in the VFO mode only.
3. Memory Channel Scan
-§can proceed thru those memory channels that
data stored and have not been locked out.
have
4. Dual Scan
Scan
proceeds
alternately between
the last VHF
and
UHF
channels.
This
function
operates
in
the
VFO
mode,the MR mode and the CALL channel mode.
29
m
2
Q
a
n
<=
Advertisement
Table of Contents
