Selecting A Dab + Station; Storing Stations In The Station Memory - Kenwood CR-ST50DAB Operating Instructions Manual

Manual tuning of ensembles
• Press the <MENU> button to enter the DAB menu.
• Turn the <TUNE/AUTO/ENTER/uII> knob until "Manual tune" appears in the display.
• Pressing the knob confirms the function and the currently set station with the corresponding
frequency is shown in the display.
• Turn the <TUNE/AUTO/ENTER/uII> knob to manually select another channel.
• Press to confirm the selection. After that, the signal level is shown in the display, another press
charges the current ensemble.

Selecting a DAB + station

The stations stored alphabetically in the station list can be called up as follows:
• Turn the <TUNE/AUTO/ENTER/uII> knob to scroll backwards or forwards in the station list.
• When the desired station is selected, press the knob to start playback.
The display shows "Connecting / Playing"
• If the reception level on the selected station is insufficient for trouble-free playback,
"Service not available" appears in the display. In this case please select another station.
Storing stations in the preset memory
To store DAB stations for easier retrieval, 20 memory slots are available. 4 memory presets can be
selected via direct selection buttons.
1. Storing on the direct selection buttons 1 - 4:
• Select a station to save
• Keep the corresponding number key pressed until "Preset X Stored" appears in display.
• Stored stations can be called up by briefly pressing the direct selection buttons.
2. Assignment of the memory locations 5 - 20:
• Select a station to save
• Briefly press and hold the <*> button until "Preset store" appears.
• Turn the <TUNE/AUTO/ENTER/uII> knob to select a memory location.
• Pressing the knob completes the storage. "Preset X Stored" appears in the display.
• Stored stations can be called up by pressing <*>, <TUNE/AUTO/ENTER/uII> and loaded by
pressing the control. Alternatively, you can use the or keys.
11