Kenwood TM-702A Instruction Manual page 12

sescoeecteroetnenenenr nr oantonnmnnmr— egy neon
DTSS
DUAL em) me
Po | oF
indicates. the
signal strength
This level meter
relative receiver
of the SUB. BAND
Indicates the relative output
power setting for transmit. No
indicator indicates full power.
On when the Time Out Timer
function has been activated.
On during transmit.
On during. duplex operation.
Indicates the active memory
channel number. * indicates
that the channel is locked out.
Cis displayed during call
channel. . -
Either PO, Pi, P2, P3, or PA is
displayed during paging.
On whenever the F key has been
depressed. Also shows the last
memory channel number _ that
had been selected.
SaRAF/— 1—— 3——_5-——- 73
er |
_r= a
REV
~- frequency to the
° 2288 GGas
aes
sub-band the
Indicates
frequency.
On during dual band reception.
Indicate the selected 0.5kHz
direction .
On when the' Tone Alert
function is active. The indicator
flashes when an incoming signal
has opened the squelch.
Display the selected transmitter
offset direction.
Both — and + are lit during split
channel operation.
On when. the Reverse function
has been activated.
Displays the operating
nearest kHz
= digit: or the tone frequency etc.
The indicator flashes when
scanning.
17