Ctcss Unit Tsu-6 - Kenwood TM-702A Instruction Manual

CTCSS unit TSU-6 os :
use of the optional sub-audible tone decoder TSU-
lows for CTCSS (Tone squelch) operations. When this
'option is active squelch will only open when the proper
ne is received.
er... (Fig.1) -
3. Remove the backing from
. . the small cushion provided ec
with the TSU-6 and attach ~ ~ Attach
as shown in Fig. 2
4. Attach the cable from
TSU-6 as shown in Fig 2. —
'5. Remove the backing from
the other side of the small
cushion and attach the
TSU-6 to the transceiver as
shown.
6. Replace the cover and
6. Replace the cover and tighten the screws to complete
the installation.
7-2 DIMF unit DTU-2
1. Remove the 6 screws secur-
ing the Top cover. .
2. Gently remove the top
cover. (Fig.1 )
3. Remove the backing from
the small cushion provided
with the DTU-2 and attach
it to the back of the DTU-2
as shown in Fig. 3
4. Plug the three connectors
into the sockets in the
units. |
5. Attach the cable from
DTU-2 as shown in Fig 3.
Attach the
cable (6 Pin)
S
Front Pannel Attach the
cable
oy (10 Pin)
Attach the
cable (8 Pin)
Fig. 3
tighten the screws' to
complete the installation.
(Not use this connector)
49