Launching Netsight Applications; Restoring A Database From A Windows Server To The Appliance - Extreme Networks NetSight NS-A-20 Installation Manual

Table of Contents

Advertisement

=================================================================

Launching NetSight Applications

Now that you have configured the NetSight appliance, you are ready to access the NetSight Launch
Page and run the NetSight applications from a remote client machine.
1
Open a browser window on the remote client machine and enter the NetSight Launch page URL in
the following format:
http://<servername>:8080/
where <servername> is the NetSight appliance IP address or hostname, and 8080 is the required
port number. For example,
http://10.20.30.40:8080/
The NetSight Launch Page opens.
2 Launch your NetSight applications by clicking on the names or icons of any of the listed
applications.
A login window appears.
3 Log in as root with the same password you defined in step
in step
4
on page 15.
This is because the NetSight Server has a single pre-defined user that is the user who performed the
NetSight installation. Once the initial user has logged in, additional users can be defined.
The first time you attempt to launch a NetSight application, you will be prompted for the license text
you received when you generated your NetSight product license.
For more information on the NetSight Launch page, access the NetSight Online Help by clicking on
Help in the right corner of the NetSight Launch Page banner. In the Online Help Table of Contents,
select Installation Guide and then read the section titled "Remote Client Launch."

Restoring a Database from a Windows Server to the Appliance

This section describes several NetSight configuration changes that are required if you are moving your
NetSight installation from a Windows platform system to the NetSight appliance. The steps are
performed after restoring your database to the new appliance. (For information on restoring a
database, see the Server Information section in the NetSight Suite-Wide Tools User Guide.)
Changing Console
Use the following instructions to change the location of syslog and trap information to the new location
on the appliance.
NetSight NS-A-20 Installation Guide
3
on page 15 or as the user you specified
Configuration
19

Advertisement

Table of Contents
loading

Table of Contents