- Operating The Video Components; Play Ba Cas Cc Hesintcicaecute Vais Oh Epade Eto Cvan Evant Sivteubsiceds Sued Vars Ofucsbeoesnovsaesccaas Se Eacesersubandsuydotectusies; Video Recording Sv Ewsbiscscuiostncdgebcccdisucuee Cs Visawuanceeydceadetwedealeclvey Seshuae Hone Sed Ba Vavedusodbeddsoaceinss - Pioneer VSX-D901S Operating Instructions Manual

Press the POWER switch to the ON position, and turn on the power
to the other video components you wish to use.
INPUT SELECTOR
- OPERATING THE VIDEO COMPONENTS
INPUT ATT DSSS
TAPE 2 MONITOR
PLAYBACK
1. Use the INPUT SELECTOR buttons to select the desired video
program source.
Program source INPUT SELECTOR
To watch a video cassette tape on the
VCR connected to VCR 1 jacks
To watch a video cassette tape on the
VCR connected to VCR 2 jacks
To watch a video cassette tape on the
VCR or TV camera, etc., connected to VCR 3
front panel VCR 3 INPUT jacks
To watch a video disc on an LD player or
CD CDV LD player connected to LD IN LD
jacks
VCR 1
VCR 2
To watch a TV program (reception with a
TV tuner connected to TV IN jacks) a
When watching a video played back on a
video component connected to the VIDEO VIDEO
IN jacks,
PS 6 ee a es ee a a
* tf the TAPE 2 MONITOR button is ON, press to turn it to OFF.
2. Operate the appropriate video component to play back the program
source.
3. Adjust the volume and tone controls as desired.
¢ When sound is monaural, turn the DSSS button ON to enjoy
simulated stereo.
* Refer to page 32 for details concerning surround operation.
© Refer to page 34 for details concerning picture quality adjustment
with the video enhancer.
* Refer to page 33, 34 for details concerning sound quality
adjustment.
¢ When there is distortion due to excessively high input level, switch
INPUT ATT ON.
REC SELECTOR
VIDEO RECORDING
You can record audio and video from VCR 3, LD, TV, VIDEO, on VCR |
and VCR 2.
You can also select the video recording source with the REC SELECTOR.
When not using the REC SELECTOR
You can record video that has been adjusted by the enhancer.
1. With the REC SELECTOR button, make sure that no componert
indicators are lit in the REC SEL display.
2. Select the source you want to record from (VCR 3, LD, TV, VIDEO},
with the INPUT SELECTOR buttons.
3. Load the VCR 1 (or VCR 2) with a tape for recording.
4. Start recording on VCR 1 (or VCR 2).
© For VCR 1 or VCR 2, select a line input (external input).
5. Start playback on the component selected with the INPUT
SELECTOR buttons.
When using the REC SELECTOR
You can select a source and different video recording source with the
INPUT SELECTOR buttons. For example, you can enjoy a video on VCR
3 while recording a video disc. In this case, video recording of a picture
that has been adjusted by the enhancer is not possible.
1. Select the source you want to record from (VCR 3, LD, TV, VIDE)
with the REC SELECTOR button.
2. Load VCR 1 {or VCR 2) with a tape for recording.
3. Start recording on VCR 1 (or VCR 2).
* For VCR 1 or VCR 2, select a line input (external input).
4. Start playback on the component selected with the RE(
SELECTOR button.
* Do not select the component that you are using to record videy
on (VCR 1 or VCR 2) with the INPUT SELECTOR.
COPYING VIDEO TAPES
The procedure for copying from VCR 1 to VCR 2, and from VCR 2 t
VCR 1 when using REC SELECTOR, and when not using it, are the sam
as previously mentioned. Select the component for playback with th
INPUT SELECTOR or REC SELECTOR.
3)
<ARB1371)