Table of Contents
Advertisement
USING MULTI-ROOM AND SOURCE (MR & S)
[Setting MULTI-ROOM
& SOURCE
Sub Function]
1. Select LD with the INPUT SELECTOR buttons.
2. Turn the MULT!I-ROOM & SOURCE OFF/ON button ON.
e The button lights.
¢ When MULTI-ROOM & SOURCE is ON, the Sub function at that
time is the same as that set with the INPUT SELECTOR.
After
switching
MULTI-ROOM
&
SOURCE
ON,
the
SUB
FUNCTION cannot be switched on the receiver. Switch it from
Sub room with the remote control unit.
a
qi
i
{Setting MULTI-ROOM
& SOURCE Main Functions]
3. Select VCR 1 with the INPUT SELECTOR buttons.
. Start playback of VCR 1 and the LD player.
. For Main room, adjust volume level with the receiver's MASTER
VOLUME control.
For Subroom, point the remote control at the MR-100 and adjust
the volume level with the MASTER VOLUME buttons.
af
In Sub room, when you do not know the present volume level or
Sub Function of the receiver, press the RETURN button.
The
Sub Function
becomes
TUNER,
and you will hear the
broadcast preset in station call No.1. The volume level will be that
initially set on the receiver. You can then select your desired Sub
Function, and adjust volume to the desired level.
¢ Switch setting and output
SWITCHES
AUDIO OUTPUT JACKS
MULTI! ROOM | SURROUND
REC
REAR AMP
& SOURCE
MODE
SELECTOR | PRE OUT
OFF
OFF
OFF
Mute
Main Function
Function
OFF
ON
OFF
SUR Rear
Function
ON
OFF
OFF
Sub Function | Main Function
Main
| Main Function |
Precautions concerning MULTI-ROOM
& SOURCE
¢ in Sub room, if you use the remote control to switch RECEIVER
POWER off (standby), power to the receiver itself is cut, so be careful
when recording or copying tapes in Main room.
* Remember
that if you operate the tuner section in Sub room and
change the station when you are recording a radio broadcast in Main
room, the station you changed to will be recorded.
* The first time you use MULTI-ROOM & SOURCE, volume in Sub room
will be set to the initial level. Each time you switch MULTI-ROOM &
SOURCE ON, volume returns to the initial level.
* When MULTI-ROOM & SOURCE is ON, Sub Function and Sub room
volume level cannot be changed in Main room.
* MULTI-ROOM & SOURCE can only be switched ON/OFF with the
switch on the receiver itself. Set the Sub Function in Main room,
switch MULTI-ROOM
& SOURCE
ON, and move to Sub room.
Volume levels in Main room and Sub room.are independent.
* In Main room
and Sub room,
when
a remote
control signal is
transmitted at the same time, the receiver does not operate.
* Sub room volume cannot be completely cut off. Even if you continue
pressing the MASTER VOLUME button on the remote control, there
will still be a little sound.
° As the remote
control for the Sub room,
use the CU-AV70O,
CU-AV 100, or CU-AV200. in this case, first have that remote control
memorize the RETURN button command from the receiver's remote
control before use.
SPEAKERS OUTPUT
VIDEO
FRONT
MULT! ROOM
REAR
TO es
MULT! ROOM &
A,B
SPEAKER
a
ee
VIDEO OUT
a=
Mute
Sub Function
* VIDEO
(REC) OUT is the same source as AUDIO
(REC) OUT. When the input selector is switched to the audio source, VIDEO OUT is mute.
SUR: Surround
37
<ARB1371>
Advertisement
Table of Contents
