Receiving Fm Simulcast Tv Programs; Operating The Audio/Video Components; Tape 2 Monitor - Pioneer VSX-502 Operating Instructions Manual

RECEIVING FM SIMULCAST TV PROGRAMS
Combine a TV set and a VCR (or TV tuner), to receive FM simulcast 1. Select the desired TV program with the TV set.
TV programs (stereo TV sound transmitted from an FM radio station)
3. Adjust the volume and tone controls as desired.
OPERATING THE AUDIO/VIDEO COMPONENTS
Press the power switch to the ON position, and turn on the power to
the other components required (for example, TV, VCR, cassette deck
etc.).
PLAYBACK
1. Use the INPUT SELECTOR buttons to select the desired program
source.
To listen to a tape on the
cassette deck (or digital audio
tape deck) connected to
TAPE 2 MONITOR jacks.
To listen to a tape on the
cassette deck (or digital! audio
tape deck) connected to
TAPE 1/DAT jacks.
TAPE 2 MONITOR
TAPE 1/DAT
TV
To watch the TV picture from
a TV tuner connected to the
TV jacks.
To watch a LaserDisc.
To watch a video cassette
tape on the VCR connected to
VCR 2 jacks.
To watch a video cassette
tape on the VCR connected to
VCR 1 jacks.
*1f a music source other than TAPE 2 is selected, switch OFF the
TAPE 2 MONITOR.
2. Operate the appropriate audio/video component to play
back the program source.
© For a video source, switch the TV connected to this unit to the
video input mode.
3. Adjust the volume and tone controls as desired.
When listening to a monaural source, turn the SIMULSTED
STEREO button ON to enjoy simulated stereo sound.
© Refer to page 26 for details concerning surround operaton.
Refer to page 26 for details concerning sound qsgality
adjustment.
24
<ARBIA19>