Operating The Video Components; Play Back Vcvshencrccacncvccatuadiew Vad Wdnedeec Oeeate Cts Eracapcensc-Eedeeatiocssudtswadsecdacegelcc Owecasge Mysebnes Nee Ses Sale; Video Recording Ooicc.ciecceenei Cc Lcnceeaadarcitaceeeeuada Cad Secdecedesnsivednacdacaeebaoaeceoudsscskeedens Duaesetel Eats - Pioneer VSX-95 Operating Instructions Manual

OPERATING THE VIDEO COMPONENTS
Press the POWER switch to the ON position, and turn on the power
to the other video components you wish to use.
INPUT SELECTOR INPUT ATT DSSS
TAPE 2 MONITOR REC SELECTOR
(a) source.
i aa a
You can also select the video recording source with the REC SELECTOR.
. Select the source you want to record from (VCR 3, LD, TV, VIDEO),
with the INPUT SELECTOR buttons.
3. Load the VCR 1 (or VCR 2) with a tape for recording.
4. Start recording on VCR 1 (or VCR 2).
° For VCR 1 or VCR 2, select a line input {external input).
To watch a video disc on a video disc
:
5. Start playback on the component selected with the INPUT
player or compatible LaserDisc player LD SELECTOR buttons.
connected to LD IN jacks
To watch a video cassette tape on the
VCR connected to VCR 2 jacks VER 2 2
To watch a video cassette tape on the
VCR or TV camera, etc., connected to VCR 3
front panel VCR 3 INPUT jacks
2. Operate the appropriate video component to play back the program
source.
3. Adjust the volume and tone controls as desired.
e When there is distortion due to excessively high input level, switch
INPUT ATT ON. COPYING VIDEO TAPES
The procedure for copying from VCR 1 to VCR 2, and from VCR 2 to
VCR 1 when using REC SELECTOR, and when not using it, are the same
as previously mentioned. Select the component for playback with the
INPUT SELECTOR or REC SELECTOR.
~
31
<ARB1333>