EK Pro RTX A5000 Rack User Manual page 2

Gpu water block
Table of Contents

Advertisement

If this product is made from aluminum and can be only used
with other aluminum liquid cooling components, such as Al
fittings, water blocks and radiators. Mixing aluminum with
copper and brass products can cause galvanic corrosion of
the metal and render liquid cooling equipment useless. Such
misuse is not covered by warranty.
Before you start using this product, please follow these basic guidelines:
Please carefully read the manual before beginning with the
installation process!
Please remove your graphics card from the computer to
assure safest mounting process in order to prevent any
possible damages to your GPU and/or graphics card circuit
board (PCB).
The EK Fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured by the
rubber O-ring gaskets.
The
use
of
corrosion
recommended for liquid cooling systems, and mandatory for
nickel plated water blocks!
Do not use pure distilled water! For best results EK
recommends the use of EK-CryoFuel coolants!
Make sure to thoroughly bleed air out of your water block, or
you will not reach optimal performance!
inhibiting
coolants
is
always

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro RTX A5000 Rack and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents