Atdec AWM-FC Installation Manual

C clamp

C Clamp

COMPONENT CHECKLIST

C Clamp Bracket

(x1)

C Clamp Plate

(x1)

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! This product is compatible with Atdec AWM Series modular products, including Posts (AWM-P) and Base (AWM-LB).

! The manufacturer accepts no responsibility for incorrect installation.

! Product must only be installed on a work surface capable of supporting the weight of all equipment being mounted.

! Product is not suitable for installation on work surfaces with a bullnose or bevelled edge.

Cover for Post

(x1)

Cover for Base

(x1)

Installation Guide

4mm

REQUIRED TOOLS

Hex Key

(x1)

• All tools supplied

5mm

Hex Key

(x1)

AWM-FC

AWM-FC Page 1 of 4

Table of Contents

Need help?

Do you have a question about the AWM-FC and is the answer not in the manual?

Page 1 IMPORTANT INFORMATION ! Please ensure this product is installed as per these installation instructions. ! This product is compatible with Atdec AWM Series modular products, including Posts (AWM-P) and Base (AWM-LB). ! The manufacturer accepts no responsibility for incorrect installation.
Page 2 3.5 Tighten the set screws on both sides of the clamp bracket is positioned tight up against the mounting surface edge. desk clamp bracket evenly. M8 x 16mm Set Screw Desk Clamp Bracket Mounting surface AWM-FC Page 2 of 4...
Page 3 5.5 Tighten the set screws and on both sides of the desk clamp bracket is positioned tight up against the mounting desk clamp bracket surface edge. M8 x 16mm Set Screw Desk Clamp Bracket Mounting surface AWM-FC Page 3 of 4...
Page 4 No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20230929...