Table of Contents
Advertisement
NAMING A STATION
if desired, you may memorize station call-tetters and display them. In
this case, use the call-letter mode.
3.0
1. STATION CALL
2. STATION NAME
4. meMory
Memorizing with the call-tetter mode.
* A maximum of four characters can be memorized.
1. Tune into a desired station, and preset in a STATION CALL button.
* Refer to "PRESET TUNING" for preset procedure.
* Stations already preset can be recalled with the STATION CALL
buttons,
2. Press the STATION NAME button.
Select the desired character with the JOG dial.
characters in the following order.
C7 Ee;
en
ZL,
CRE Cd
C QM
ag
inn
re
4, Press the MEMORY button,
5. By repeating steps 3 and 4 up to four characters can be memorized.
® When "COMPLETE" is displayed, memorization is completed.
_ * Press MEMORY button within 5 seconds of selecting a character
otherwise the procedure is canceled and the display returns to
TUNER or the previously memorized name.
6. Repeat steps 1 to 5 when naming other stations.
id
Returning to the TUNER display.
1. Use the JOG MODE button to select "TUNING".
2. Change the reception frequency with the JOG dial.
* The station display name will change to "TUNER".
28
<ARB1420>
@ Select CH 9 (Press [9] once.)
When no station name has been previously memorized.
|
TUNER
{When a station name has been previously memorized.)
HAHAH
u
@® Press the STATION NAME button.
aan
Flashes
NAME
Fgel
@® Turn the JOG dial until "A" is displayed.
S
Flashes _
@® Press the MEMORY button.
When one character is set.
Flashes
memory
® Repeat the operation for the other characters.
"]
IO)
"i
©)
|
ad
AHH
WO)
RECT
¥
If ail four characters are not set, the new name will not be memorized.
if a name has less than four characters, insert a space {"
"').
if frequencies are not yet stored in STATION CALL buttons, tune in a
station, and then store it in one of the STATION CALL buttons.
Advertisement
Table of Contents
