Setting To Work - Connection To The Power Supply; Extensions; Grounding Instructions; Dry Applications - Nilfisk-Advance VHS110 Z22 Instructions For Use Manual

VHS110 Z22
Setting to work - connection to the power
supply
■ Make sure there is no evident sign of damage to
the machine before starting work.
■ Before plugging the machine into the electrical
mains, make sure the voltage rating indicated on
the data plate corresponds to that of the electrical
mains.
■ Connect the plug into a socket with a correctly
installed ground contact/connection. Make sure
that the machine is turned off.
■
The plugs and connectors of the connection cables
must be protected against splashes of water.
■
Check that for proper connection to the electrical
mains.
■
Use the machine only when the cables that connect
to the electricity mains are in perfect condition
(damaged cables could lead to electric shocks!).
■ Regularly check there are no signs of damage,
excessive wear, cracks or ageing on the electric
cable.
When the device is operating, do not:
■ step on, crush, pull or damage the mains
connection cable.
■ When the device is operating avoid disconnecting
the cable from the mains only by pulling the plug
(do not pull on the cable itself).
■
Only replace the electric power cable with one of
the same type as the original: H07 RN-F, The same
rule applies if an extension is used.
■
The cable must be replaced by the manufacturer's
Service Centre staff or by equivalent qualified
personnel.
IT
Those responsible for plant safety must ensure that:
■ Prevent any improper use or manoeuvre.
GB
■ Make sure that the safety devices are not removed or
tampered with.
F
■ Check that all maintenance operations are regularly
performed;
■ Make sure that no machine part (couplings, holes, etc.) is
D
modified to attach additional devices;
■ Make sure that only original Nilfisk spare parts are used.
E
The user shall be responsible for ensuring that installation
complies with the all relevant local provisions. The
equipment must be installed by qualified technicians who
have read and understood the instructions herein.
C421
CAUTION!
CAUTION!
[ NOTE ]

Extensions

Extension cords are not allowed within a classified zone unless
marked accordingly.
CAUTION!
The machine power socket must be protected by a
differential circuit-breaker with surge current limitation,
that shuts off the power supply when the current
discharged to the ground exceeds 30 mA for 30 msec.
or an equivalent protection circuit.
CAUTION!
Never spray water on the machine: this could be
dangerous for people and could short circuit the power
supply.

Grounding instructions

This equipment must be grounded. In case of malfunction
or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock.
This appliance is equipped with a cord with a grounding
conductor and a grounding plug. The plug must be plugged
into an appropriate outlet, properly installed and grounded, in
accordance with all local codes and regulations.
CAUTION!
Incorrect connection of the appliance ground conductor
may result in the risk of electric shock. If in doubt
about the correct grounding of the socket, contact an
electrician or a qualified technician. Do not modify the
plug supplied with the appliance if it does not fit the
socket; instead, have a suitable socket installed by a
qualified electrician.

Dry applications

The supplied filters and the bag (if applicable) must be
installed correctly.
CAUTION!
Comply with the safety regulations governing the
vacuumed materials.
8
[ NOTE ]