Table of Contents
Advertisement
Quick Links
No．70105-2-02-7
OIL MIST TRAP
INSTRUCTION MANUAL
OMT-050A
Before Use
For safe and efficient operation, be sure to go through
this manual before attempting to use this pump.
After reading the manual, keep it in your file for future
reference.
Specifications given in this manual are subject to change
without notice due to improvement.
ULVAC KIKO, Inc
1
Advertisement
Table of Contents
Related Manuals for Ulvac OMT-050A
Summary of Contents for Ulvac OMT-050A
- Page 1 For safe and efficient operation, be sure to go through this manual before attempting to use this pump. After reading the manual, keep it in your file for future reference. Specifications given in this manual are subject to change without notice due to improvement. ULVAC KIKO, Inc...
- Page 2 If you find any defect. Please contact our dealer or branch. 4.INSTALLATION Table.2 OMT-050A fits our vacuum pump. Pumping speed(L/min) 5～10 20～30 40～50 G-5DA G-20DA, G-25SA G-50DA, G-50SA OMT-050A G-10DA GHD-031A GLD-040 Fits our vacuum pump GHD-031B GLD-051 GLS-051 Remove standard discharge port and screw up OMT-050A.
- Page 3 5minutes or high vacuum {below 40Pa} operation is required. 6.MAINTENANCE 1) Element of OMT-050A is subject to exchange every 1,500 to 2,000 hour of operation due to filling up of the element by dust. 2) Whole gasket also should be exchanged at the same time. These parts are available at our dealer or our branch.
- Page 4 8.ELEMENT AND GASKET FOR EXCHANGE PROCEDURE The number in a circle indicates parts of DISASSEMBLY DRAWING (Fig. 2). 1) Before exchanging Element and Gasket, remove OMT from the pump. 2) See Fig. 2 and table. 3. 3) Turn Screw ⑮ counter clockwise with a driver. 4) Remove Screw and then remove Seal washer ⑫.
- Page 5 10.DISASSEMBLY DRAWING Fig. 2 Disassembly Drawing of OMT-050A 11.PARTS LIST Table.3 Parts List DESCRIPTION Q'ty REMARKS No. DESCRIPTION Q'ty REMARKS 1 Top cover 9 Check valve 2 Case 10 Spring B 3 Element stopper 11 Element 4 Check valve stopper...
- Page 6 This manual contains only general information about pump operation. Therefore, if you come up with any question or trouble, contact your local ULVAC KIKO representative or ULVAC KIKO. WARRANTY (1) The warranty period of this oil mist trap is one year from shipment.
- Page 7 No．70105-2-02-7 < ULVAC KIKO,Inc. > Head office 291-7 Chausubaru Saito-city,Miyazaki 881-0037 Japan Tel:+81-983-42-1411 Fax:+81-983-42-1422 Sales division 1-10-4 Kitashinyokohama Kohoku-ku Yokohama-city,Kanagawa 223-0059 Japan Tel: +81-45-533-0206 Fax: +81-45-533-0204...
Need help?
Do you have a question about the OMT-050A and is the answer not in the manual?
Questions and answers