Table of Contents
Advertisement
3
Push the battery in slightly, then lift the battery from the bottom edge
and remove.
4
Replace with new battery by first inserting the long edge with the three
tabs, then pushing the battery down to lock into place.
5
Replace the cover. Once the battery makes contact, the power-on
sequence begins.
SIM Card Slot
To insert or remove your SIM card, you must first remove the battery.
1
Remove the battery cover and battery by following "Removable
Battery", steps 1-3, on pages 14-15.
2
Notice the SIM card slot, which is shaped like a SIM card and is
located just to the left of center.
3
To insert the SIM card, slide the card into the slot with the gold
contacts facing down. Make sure the two side brackets are on top of
the card, holding the card into place.
4
To remove the SIM card, insert your nail or paper clip into the notch in
the case located next to the card in order to move the card up slightly.
Then gently slide the card out, free of the two brackets.
Device Basics
15
Advertisement
Table of Contents
