Table of Contents
Advertisement
SIM Card Slot
To insert or remove your SIM card, you must first remove the battery.
1
2
3
4
Memory Card Slot
Your device comes with a Mini Secure Digital (miniSD) flash memory card. To insert
or remove the memory card, you must first remove the back cover as described in
"Removable Battery", step 2, on page 17.
1
18
Device Basics
Remove the battery cover and battery by following "Removable Battery", steps
1-3, on page 17.
Notice the SIM card slot, which is shaped like a SIM card and is located just to
the left of center.
To insert the SIM card, slide the card into the slot with the gold contacts facing
down. Make sure the two side brackets are on top of the card, holding the card
into place.
To remove the SIM card, insert your nail or paper clip into the notch in the case
located next to the card in order to move the card up slightly. Then gently slide
the card out, free of the two brackets.
With the back cover removed, you can see the memory card slot on the right
edge of the device.
Advertisement
Table of Contents
