UTStarcom Sidekick ID Reference Manual page 57

Utstar sidekick id: reference guide
Table of Contents

Advertisement

I needed to remove my battery, so I did. After I put the battery back
in my device, it powered up, but all my messages and other data
were gone. Is it all gone for good?
No, all your data is regularly saved to the Danger service so it is safe. If
you wait a few minutes, all your data will be restored to your device. (Note,
however, that any data you entered or modified between the last save to the
Danger service and when you removed the battery will be lost.)
Chances are you removed the battery before powering off your device.
Every time you power off your device, your data is saved to the device's
internal flash memory. However, if you remove your battery before shutting
down, your data will not be saved to flash. It is, however, saved on an
ongoing basis to the service, which means your data is always backed
up! However, for your convenience and to avoid unnecessary data traffic,
always power off your device before removing the battery!
How can I improve radio reception when I'm in a "fringe" coverage
area?
Try the following to improve radio reception:
Use the hands-free headset and position the phone away from your
body.
Walk to a window if you are indoors.
Step outside of buildings that have high metal, concrete, or earthen
content because they may absorb radio signals.
Step away from metallic windows because they absorb RF energy.
Go to the highest spot possible to make the call.
Step away from computers or electronic equipment.
If you are in a car, first park, then try the call from outside the car.
If you are near or directly under a cellular/PCS radio tower, walk at least
one block away.
My device has not connected to the service for quite a while. Is
there anything I can do myself before calling Customer Care?
Yes, try powering your device off and on. After your device boots, you'll
know you've connected to the service when you see the
in the title bar again.
Troubleshooting
57

Advertisement

Table of Contents
loading

Table of Contents