Device Privacy Code; Sound Profiles - UTStarcom Sidekick ID Reference Manual

Device Privacy Code

If you want to secure your device from unauthorized access once your
device has gone into key guard mode, you will first need to set up a privacy
code:
1 Press to open the Jump screen. Press
JUMP
Settings > Key Guard & Security.
2 Scroll down to the Privacy Lock group box. Highlight
3 Enter a three-digit code using the keyboard or the dial:
At the prompt, re-enter your code to verify.
4 A "New Combination Enabled" message appears. Select OK.
5 Press to save your settings and return to the Jump screen.
DONE
You can still make emergency calls from the key guard screen even if
privacy code is enabled by opening the display then pressing
.
JUMP

Sound Profiles

To create a new sound profile or modify an existing profile, press
then press and select Settings > Sound Profiles. You can have up to
MENU
eight profiles total. The system provides six profiles by default.
, then press the trackball to select it.
then select
MENU
+
MENU
JUMP
Setting Up Your Device

,
25