Reread Delay; User-Specified Reread Delay - Honeywell Granit XP 199xi Series User Manual

Reread Delay

This sets the time period before the scanner can read the same barcode a second
time. Setting a reread delay protects against accidental rereads of the same bar-
code. Longer delays are effective in minimizing accidental rereads. Use shorter
delays in applications where repetitive barcode scanning is required. Reread Delay
only works when in a

User-Specified Reread Delay

If you want to set your own length for the reread delay, scan the barcode below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the
Programming Chart,
2D Reread Delay
Sometimes 2D barcodes can take longer to read than other barcodes. If you wish to
set a separate Reread Delay for 2D barcodes, scan one of the programming codes
that follows. 2D Reread Delay Off indicates that the time set for
used for both 1D and 2D barcodes. Default = 2D Reread Delay Off.
Granit XP User Guide
Presentation Mode
Short (500 ms)
Long (1000 ms)
beginning on page 291, then Save.
* 2D Reread Delay Off
(see page 86). Default = Medium.
User-Specified Reread Delay
* Medium (750 ms)
Extra Long (2000 ms)
Reread Delay is
93