Display Controls; Battery Charger - UTStarcom SideKick 3 Reference Manual

Utstar sidekick 3: reference guide
Table of Contents

Advertisement

2
Your device is now offline. You should confirm offline status by looking next to
the radio tower icon in the title bar; it should read OFF.
3
To turn wireless back on, from the Jump screen, press
Airplane Mode > Turn Wireless On.
Note that after you select the Turn Wireless On/Off menu item, it takes a few
seconds for the radio to actually turn on or off. During that time, the menu item will
appear dimmed and you will not be able to select it.

Display Controls

To adjust the display backlight brightness, open the Display Control from the Jump
screen by pressing
down to highlight the Brightness slider. Press the trackball to open the slider for
adjustment. Roll right to increase brightness; left to decrease.

Battery Charger

Your device comes with a removable, rechargeable lithium-ion battery. When
you first receive your device, it is important that you fully charge the battery, as
described in the following steps.
Only use the charger (wall adapter) and battery provided with your device or
Warning
approved by T-Mobile, or you risk damaging your device.
1
Attach the battery charger to your device.
Locate the battery charger that came in the box with your device. Insert the
charger lead (the small round end of the cord) into your device's power jack
then selecting Settings > Battery & Display. Scroll
MENU
and select
MENU
Device Basics
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SideKick 3 and is the answer not in the manual?

Questions and answers

Table of Contents