UTStarcom SideKick 3 Reference Manual page 10

BLUETOOTH HANDS-FREE HEADSET OR CAR KIT
headset or car kit, do the following:
1
2
3
4
Note
You can transfer the call's sound either before or during a call.
5
6
STEREO HEADSET JACK
making/receiving a call. To use the button:



10 Device Basics
Press to open the Jump screen. Press
JUMP
select Bluetooth to open the submenu. Make sure Bluetooth features are "on".
(There should be a Turn Bluetooth Off menu item.)
When you are in your car, make sure your hands-free headset or car kit is ready
to pair by following the manufacturer's instructions. On your Sidekick, go into
the Phone application. Press
From the Pairing dialog box, select your Bluetooth hands-free headset or car
kit from the list of devices (you may have to wait a few seconds while the list
populates with Bluetooth devices). If prompted, type the device's PIN code,
then press
DONE
By default, your call's sound will go through the device handset. To send or
receive your call using a Bluetooth device, press
Sound to, then select your Bluetooth device from the submenu.
Place your call.
When finished with your call, press
Press the button once to answer a call and a second time to end it.
During a call, press once to answer a second incoming call and put the first
caller on hold.
With two active calls, press the button once to end the foreground call and press
again to resume the background call.
and select Settings > Pairing.
MENU
to dismiss the PIN Code dialog box.
END CALL
Always connect your stereo headset to your device before
To use a Bluetooth hands-free
to open the menu, then
MENU
and select Transfer
MENU
.